LaserTwin-AM: In-Situ Optical and 3D Point-Cloud Spatiotemporal Fusion for Closed-Loop Defect Mitigation in Laser Powder Bed Fusion

Authors

  • Arnulfo Salvo Department of Computer Science, University of North Texas, Denton, TX, USA. Author

Keywords:

laser powder bed fusion; digital twin; multimodal fusion; point cloud; in-situ monitoring; closed-loop control; defect mitigation; additive manufacturing governance

Abstract

Laser powder bed fusion has matured from a prototyping technique into a production pathway for geometrically complex metallic components, yet its industrial credibility remains constrained by stochastic defects that emerge at scales faster than conventional inspection can resolve. This paper presents LaserTwin-AM as a system-level architecture for closed-loop defect mitigation that fuses in-situ optical observations with layerwise three-dimensional point-cloud reconstructions inside a digital twin. The argument is not that sensing alone can eliminate porosity, lack of fusion, balling, spatter-induced irregularities, or delamination, but that a disciplined spatiotemporal fusion layer can convert heterogeneous signals into actionable process state estimates while preserving traceability, uncertainty, and operational safety. The proposed architecture distributes sensing, reconstruction, fusion, and actuation across edge and plant-level infrastructure, with explicit interfaces for model governance, calibration, data provenance, and human oversight. The paper examines structural trade-offs among latency, accuracy, coverage, bandwidth, and certification burden; compares the architecture with adjacent practices in cyber-physical manufacturing and multimodal inspection; and discusses fairness, liability, sustainability, and policy implications that arise when defect mitigation becomes partially autonomous. It concludes that LaserTwin-AM is best understood as a socio-technical infrastructure rather than a single model, and that its credibility depends as much on validation regimes, lifecycle governance, and deployment economics as on fusion accuracy alone.

References

1. Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016). Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Materialia, 108, 36-45.

2. King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015). Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Applied Physics Reviews, 2(4), 041304.

3. Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016). Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing. Materials & Design, 95, 431-445.

4. Tapia, G., & Elwany, A. (2014). A review on process monitoring and control in metal-based additive manufacturing. Journal of Manufacturing Science and Engineering, 136(6), 060801.

5. Grasso, M., & Colosimo, B. M. (2017). Process defects and in situ monitoring methods in metal powder bed fusion: A review. Measurement Science and Technology, 28(4), 044005.

6. Grieves, M., & Vickers, J. (2017). Digital twin: Mitigating unpredictable, undesirable emergent behavior in complex systems. In F.-J. Kahlen, S. Flumerfelt, & A. Alves (Eds.), Transdisciplinary perspectives on complex systems (pp. 85-113). Springer.

7. Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019). Digital twin in industry: State-of-the-art. IEEE Transactions on Industrial Informatics, 15(4), 2405-2415.

8. Wang, Y., Zheng, P., & Xu, X. (2020). Digital twin-driven smart manufacturing: Connotation, reference model, applications and research issues. Robotics and Computer-Integrated Manufacturing, 61, 101837.

9. Li, X., He, H., Huang, J., Liu, R., Qian, T., & Hon, C. (2025). ASFM-AFD: multimodal fusion of AFD-optimized LiDAR and camera data for paper defect detection. IEEE Transactions on Instrumentation and Measurement, 74, 1-14.

10. Qi, C. R., Su, H., Mo, K., & Guibas, L. J. (2017). PointNet: Deep learning on point sets for 3D classification and segmentation. In Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition (pp. 652-660). IEEE.

11. Qi, C. R., Yi, L., Su, H., & Guibas, L. J. (2017). PointNet++: Deep hierarchical feature learning on point sets in a metric space. Advances in Neural Information Processing Systems, 30, 5099-5108.

12. Lane, B., Whitenton, E., & Moylan, S. (2015). Thermographic measurements of the commercial laser powder bed fusion process at NIST. Rapid Prototyping Journal, 21(5), 574-584.

13. Ye, D., Hong, G. S., Zhang, Y., Zhu, K., & Fuh, J. Y. H. (2018). Defect detection in selective laser melting technology by acoustic signals with deep belief networks. International Journal of Advanced Manufacturing Technology, 96(5-8), 2791-2801.

14. Scime, L., & Beuth, J. (2018). Anomaly detection and classification in a laser powder bed additive manufacturing process using a trained computer vision algorithm. Additive Manufacturing, 19, 114-126.

15. Scime, L., & Beuth, J. (2019). A multi-scale convolutional neural network for autonomous anomaly detection and classification in a laser powder bed fusion additive manufacturing process. Additive Manufacturing, 24, 273-286.

16. Francis, J., & Bian, L. (2019). Deep learning for distortion prediction in laser-based additive manufacturing using big data. Manufacturing Letters, 20, 10-14.

17. DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018). Additive manufacturing of metallic components – Process, structure and properties. Progress in Materials Science, 92, 112-224.

18. Mani, M., Lane, B., Donmez, A., Feng, S., Moylan, S., & Fesperman, R. (2015). Measurement science needs for real-time control of additive manufacturing powder bed fusion processes. National Institute of Standards and Technology.

19. Lee, J., Bagheri, B., & Kao, H. A. (2015). A cyber-physical systems architecture for Industry 4.0-based manufacturing systems. Manufacturing Letters, 3, 18-23.

20. Mittelstadt, B. D., Allo, P., Taddeo, M., Wachter, S., & Floridi, L. (2016). The ethics of algorithms: Mapping the debate. Big Data & Society, 3(2), 2053951716679679.

Downloads

Published

2026-10-17