Generative Design Optimization of Modular Masonry Structures Using Computational Geometry and Robotic Fabrication Constraints

Authors

  • Edith Devaux Department of Computer Science, Colorado State University, Fort Collins, CO, USA. Author
  • Sosimo Fuertes Department of Computer Science, Binghamton University, Binghamton, NY, USA. Author

Keywords:

modular masonry; generative design; computational geometry; robotic fabrication; limit analysis; multiobjective optimization

Abstract

Modular masonry structures combine discrete compression-resistant units with free-form architectural surfaces, but their design is constrained by joint stability, module geometry, construction sequence, and the reachable workspace of robotic manipulators. Existing digital workflows often separate geometric modeling, structural form finding, and fabrication planning, so a layout that is visually or structurally plausible may be difficult or impossible to assemble. This paper develops a generative design optimization framework that treats module position, orientation, unit type, and assembly order as coupled decision variables. A discrete limit-state formulation enforces compression-dominated equilibrium and Coulomb friction at joints; computational geometry relates surface curvature to admissible module size, joint deviation, and bond staggering; and robotic constraints encode inverse-kinematic reachability, collision clearance, payload limits, and placement tolerance. The resulting multiobjective problem minimizes material volume, fabrication time, surface deviation, and constraint penalties, while a robust margin measures feasibility under bounded variations in module dimensions, friction, and placement error. The framework is assessed analytically by tracing constraint interactions rather than through reported experiments. The analysis indicates that curvature-adaptive module sizing and sequence-aware reachability are first-order determinants of feasible designs, and that ignoring either produces layouts whose structural or fabrication feasibility is only incidental. The formulation provides a coherent basis for computational design tools that align geometric freedom with compression-only masonry behavior and robotic fabrication limits, reducing the need for late-stage redesign and supporting modular, robotically assembled masonry construction.

References

1. Pottmann, H., Asperl, A., Hofer, M., & Kilian, A. (2007). Architectural geometry. Bentley Institute Press.

2. Oxman, R. (2006). Theory and design in the first digital age. Design Studies, 27(3), 229–265.

3. Block, P., Ciblac, T., & Ochsendorf, J. (2006). Real-time limit analysis of vaulted masonry buildings. Computers & Structures, 84(29–30), 1841–1852.

4. Kilian, A., & Ochsendorf, J. (2005). Particle-spring systems for structural form finding. Journal of the International Association for Shell and Spatial Structures, 46(2), 77–84.

5. Panozzo, D., Block, P., & Sorkine-Hornung, O. (2013). Designing unreinforced masonry models. ACM Transactions on Graphics, 32(4), Article 91.

6. Deuss, M., Panozzo, D., Whiting, E., & Sorkine-Hornung, O. (2014). Assembling self-supporting structures. ACM Transactions on Graphics, 33(6), Article 214.

7. Krish, S. (2011). A practical generative design method. Computer-Aided Design, 43(1), 88–100.

8. Kolarevic, B. (2003). Architecture in the digital age: Design and manufacturing. Taylor & Francis.

9. Xu, W., Luo, D. A. N., & Gao, Y. (2019, April). Automatic brick masonry system and its application in on-site construction. In 4th International Conference on Computer-Aided Architectural Design Research: Intelligent and Informed,(CAADRIA) (Vol. 1, pp. 83-92).

10. Bock, T. (2007). Construction robotics. Autonomous Robots, 22(3), 201–209.

11. Bock, T., & Linner, T. (2016). Construction robots: Elementary technologies for offsite and onsite automation. Cambridge University Press.

12. Gramazio, F., & Kohler, M. (2008). Digital materiality in architecture. Lars Müller Publishers.

13. Deb, K., Pratap, A., Agarwal, S., & Meyarivan, T. (2002). A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Transactions on Evolutionary Computation, 6(2), 182–197.

14. Rippmann, M., Lachauer, L., & Block, P. (2012). Interactive vault design. International Journal of Space Structures, 27(4), 219–230.

15. Sass, L., & Oxman, R. (2006). Materializing design: The implications of rapid prototyping in digital design. Design Studies, 27(3), 325–355.

16. Menges, A. (2015). Material synthesis: Fusing the physical and the computational. Architectural Design, 85(5), 8–15.

17. Adriaenssens, S., Block, P., Veenendaal, D., & Williams, C. (Eds.). (2014). Shell structures for architecture: Form finding and optimization. Routledge.

18. Pottmann, H., Eigensatz, M., Vaxman, A., & Wallner, J. (2015). Architectural geometry. Computers & Graphics, 47, 145–164.

Downloads

Published

2026-10-26