Data-Driven Optimization of Fiber Placement Sequences for Improving the Structural Reliability of Composite Formworks

Authors

  • Matti Linder Department of Computer Science, University of New Hampshire, Durham, NH, USA. Author

Keywords:

composite formwork; automated fiber placement; placement sequence optimization; structural reliability; Gaussian-process surrogate; Bayesian optimization

Abstract

Composite formworks for concrete construction must maintain geometry, limit deflection, and resist repeated casting loads while remaining economical to fabricate. Automated fiber placement can produce such panels with tailored stiffness, but the sequence in which tows or tapes are deposited changes local thermal and compaction histories, residual stress, gap and overlap patterns, and defect clustering. These process effects are weakly represented in conventional layup optimization, which usually treats fiber orientation, thickness, and topology as the primary design variables. This manuscript develops a reliability-oriented framework for optimizing fiber placement sequences under manufacturing and serviceability constraints. The sequence is represented by permutation-dependent process descriptors, including deposition order, waiting time, path curvature, compaction, and gap statistics. A Gaussian-process surrogate maps these descriptors and formwork load parameters to a limit-state margin, and Bayesian optimization with expected improvement searches the discrete sequence space while accounting for surrogate uncertainty. The optimization objective combines estimated failure probability with fabrication cost and cycle time, subject to constraints on curvature, overlap, tack life, robot reach, and precedence. Sensitivity indices are used to identify which sequence features dominate reliability uncertainty and where calibration effort should be concentrated. The framework does not rely on a fixed empirical dataset; it specifies how process simulation, robotic placement records, and nondestructive inspection can be integrated as evidence accumulates. The main contribution is a coherent formulation that connects discrete placement sequencing to structural reliability, provides explicit surrogate and decision rules, and clarifies the trade-offs among reliability, manufacturability, and productivity in composite formwork production.

References

1. Gürdal, Z., Haftka, R. T., & Hajela, P. (1999). Design and optimization of laminated composite materials. Wiley.

2. Melchers, R. E., & Beck, A. T. (2018). Structural reliability analysis and prediction (3rd ed.). Wiley.

3. Der Kiureghian, A., & Ditlevsen, O. (2009). Aleatory or epistemic? Does it matter? Structural Safety, 31(2), 105–112.

4. Forrester, A. I. J., Sóbester, A., & Keane, A. J. (2008). Engineering design via surrogate modelling: A practical guide. Wiley.

5. Rasmussen, C. E., & Williams, C. K. I. (2006). Gaussian processes for machine learning. MIT Press.

6. Jones, D. R., Schonlau, M., & Welch, W. J. (1998). Efficient global optimization of expensive black-box functions. Journal of Global Optimization, 13(4), 455–492.

7. Shahriari, B., Swersky, K., Wang, Z., Adams, R. P., & de Freitas, N. (2016). Taking the human out of the loop: A review of Bayesian optimization. Proceedings of the IEEE, 104(1), 148–175.

8. Croft, K., Lessard, L., Pasini, D., Hojjati, M., Chen, J., & Yousefpour, A. (2011). Experimental study of the effect of automated fiber placement induced defects on performance of composite laminates. Composites Part A: Applied Science and Manufacturing, 42(5), 484–491.

9. Kim, B. C., Potter, K., & Weaver, P. M. (2012). Continuous tow shearing for manufacturing variable angle tow composites. Composites Part A: Applied Science and Manufacturing, 43(8), 1347–1356.

10. Shirinzadeh, B., Alici, G., Foong, C. W., & Cassidy, G. (2004). Fabrication process of open surfaces by robotic fibre placement. Robotics and Computer-Integrated Manufacturing, 20(1), 17–28.

11. Bessa, M. A., Bostanabad, R., Liu, Z., Hu, A., Apley, D. W., Brinson, C., Chen, W., & Liu, W. K. (2017). A framework for data-driven analysis of materials under uncertainty: Countering the curse of dimensionality. Computer Methods in Applied Mechanics and Engineering, 320, 633–667.

12. Saltelli, A., Ratto, M., Andres, T., Campolongo, F., Cariboni, J., Gatelli, D., Saisana, M., & Tarantola, S. (2008). Global sensitivity analysis: The primer. Wiley.

13. Haftka, R. T., & Gürdal, Z. (1992). Elements of structural optimization. Kluwer Academic Publishers.

14. Kumar, B. B. M., Hsueh, Y. C., Xin, Z., & Luo, D. (2021, July). Process and evaluation of automated robotic fabrication system for in-situ structure confinement. In The International Conference on Computational Design and Robotic Fabrication (pp. 368-379). Singapore: Springer Singapore.

15. Svanberg, K. (1987). The method of moving asymptotes—A new method for structural optimization. International Journal for Numerical Methods in Engineering, 24(2), 359–373.

16. Bendsøe, M. P., & Sigmund, O. (2003). Topology optimization: Theory, methods, and applications. Springer.

17. Zitzler, E., & Thiele, L. (1999). Multiobjective evolutionary algorithms: A comparative case study and the strength Pareto approach. IEEE Transactions on Evolutionary Computation, 3(4), 257–271.

18. Sobol’, I. M. (2001). Global sensitivity indices for nonlinear mathematical models and their Monte Carlo estimates. Mathematics and Computers in Simulation, 55(1–3), 271–280.

Downloads

Published

2026-10-06