Autonomous Navigation and Obstacle Avoidance for Industrial Robots in Unstructured Construction Sites

Authors

  • Rohan Conaty Department of Electrical Engineering and Computer Science, University of Kansas, Lawrence, KS, USA. Author
  • Maanas Rama Department of Computer Science and Engineering, University at Buffalo, Buffalo, NY, USA. Author

Keywords:

construction robotics; autonomous navigation; obstacle avoidance; uncertain occupancy mapping; safety-constrained planning; unstructured environments

Abstract

Industrial robots are increasingly expected to operate beyond fenced factory cells, where tasks involve moving through construction sites that are only partially known, geometrically irregular, and populated by workers, materials, and equipment. The central problem is not merely obstacle detection; it is the coupling of uncertain site representation, construction-specific traversability, dynamic obstruction, and hard safety constraints under changing operational conditions. This manuscript develops an integrated methodological framework for autonomous navigation and obstacle avoidance for industrial robots in unstructured construction sites. The framework represents the site as layered probabilistic maps of occupancy, traversability, semantics, and uncertainty; computes a risk-sensitive traversability functional; organizes motion through a hierarchical global-local planning architecture; and enforces robust clearance and control barrier safety constraints. The contribution is a coherent formulation that connects uncertainty-aware mapping to constrained trajectory generation and commissioning logic rather than a single isolated algorithm. Analytical assessment addresses perception degradation, map staleness, planning latency, dynamic obstacle prediction, and the trade-off between conservative safety margins and productive motion. The formulation also clarifies where factory assumptions break down, including wheel-terrain interaction, overhead obstruction, temporary structures, and mixed human-robot traffic. By making these dependencies explicit, the manuscript provides a technically defensible basis for designing and evaluating site-capable navigation systems without treating construction sites as scaled versions of factory floors.

References

1. Bock, T. (2007). Construction robotics. Autonomous Robots, 22(3), 201–209.

2. Saidi, K. S., Bock, T., & Georgoulas, C. (2016). Robotics in construction. In B. Siciliano & O. Khatib (Eds.), Springer handbook of robotics (2nd ed., pp. 1493–1520). Springer.

3. Thrun, S., Burgard, W., & Fox, D. (2005). Probabilistic robotics. MIT Press.

4. Elfes, A. (1989). Using occupancy grids for mobile robot perception and navigation. Computer, 22(6), 46–57.

5. LaValle, S. M. (2006). Planning algorithms. Cambridge University Press.

6. Fox, D., Burgard, W., & Thrun, S. (1997). The dynamic window approach to collision avoidance. IEEE Robotics & Automation Magazine, 4(1), 23–33.

7. Khatib, O. (1986). Real-time obstacle avoidance for manipulators and mobile robots. International Journal of Robotics Research, 5(1), 90–98.

8. Ames, A. D., Coogan, S., Egerstedt, M., Notomista, G., Sreenath, K., & Tabuada, P. (2019). Control barrier functions: Theory and applications. In 2019 European Control Conference (ECC) (pp. 3420–3431). IEEE.

9. Macenski, S., Martín, F., White, R., & Clavero, J. G. (2020). The Marathon 2: A navigation system. In 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (pp. 2718–2725). IEEE.

10. Ge, S. S., & Cui, Y. J. (2002). Dynamic motion planning for mobile robots using potential field method. Autonomous Robots, 13(3), 207–222.

11. Luo, D., & Yu, L. (2021). From factory to site—designing for industrial robots used in on-site construction. In Automating cities: design, construction, operation and future impact (pp. 87-109). Singapore: Springer Singapore.

12. Bock, T., & Linner, T. (2016). Construction robots: Elementary technologies for automated building construction. Cambridge University Press.

13. Besl, P. J., & McKay, N. D. (1992). A method for registration of 3-D shapes. IEEE Transactions on Pattern Analysis and Machine Intelligence, 14(2), 239–256.

14. Zhang, J., & Singh, S. (2014). LOAM: Lidar odometry and mapping in real-time. In Robotics: Science and Systems (Vol. 2, No. 9, pp. 1–9).

15. Karaman, S., & Frazzoli, E. (2011). Sampling-based algorithms for optimal motion planning. International Journal of Robotics Research, 30(7), 846–894.

16. Hart, P. E., Nilsson, N. J., & Raphael, B. (1968). A formal basis for the heuristic determination of minimum cost paths. IEEE Transactions on Systems Science and Cybernetics, 4(2), 100–107.

17. Dijkstra, E. W. (1959). A note on two problems in connexion with graphs. Numerische Mathematik, 1, 269–271.

18. Hoy, M., Matveev, A. S., & Savkin, A. V. (2015). Algorithms for collision-free navigation of mobile robots in complex cluttered environments: A survey. Robotica, 33(3), 463–497.

19. Siciliano, B., Sciavicco, L., Villani, L., & Oriolo, G. (2010). Robotics: Modelling, planning and control. Springer.

20. Horn, B. K. P. (1987). Closed-form solution of absolute orientation using unit quaternions. Journal of the Optical Society of America A, 4(4), 629–642.

Downloads

Published

2026-11-02